Thermal fuses must meet everyone’s usage needs

During the hot melt processing, multiple bonding points are formed at the intersection of the warp and the yarn. After multiple fatigue tests, as the number of bonding points increases, its fatigue strength will first decrease. The predicted fatigue attenuation index of hot melt with different numbers of connection points can be used as an important guide for studying anti-fatigue performance, and a theoretical calculation formula for structural performance is established, so that the connection speed of the comprehensive hot melt reaches the ideal requirements and meets the use requirements of users at that time.

There are many influencing factors in the fatigue strength of hot melt at that time. Among them, professional manufacturers have studied the processing technology of sulfur-resistant impregnation surface and white hot melt surface. Through experiments, the best heat resistance finishing method is obtained to make its production effect better and stable heat resistance. Through relevant mechanical equipment, the fatigue strength of hot melt is studied through heat resistance, and the relationship with the connection point makes the general flat fabric and other fabrics contain hot melt materials, thereby improving the use function of the product.

The calculation formula of the tensile strength of the hot melt wire can be used to predict and calculate the tensile strength of the hot melt wire based on actual measurement and correction coefficient. The method is to use the immersion method to immerse the substrate and then cool it for effective surface treatment. The method is to use new equipment to process the substrate, and then achieve a very ideal use effect, so that the hot melt wire can be better used.

If the correction coefficient of the hot melt wire stripping strength at different temperatures is small, the structural properties of the hot melt wire path function will change. First, the single hot melt wire stripping resistance is combined and calculated, and the overall shear function is calculated theoretically, so as to obtain more accurate data.